Buggies Gone Wild Golf Cart Forum - View Single Post

COURTESYCART · 09-23-2010, 08:32 AM

I have seen the collar from the motor to input shaft of diff strip, but its very uncommon.

I would have 2 agree with RIB. It sounds like you have a stripped hub/brake drum. If you replace them make sure you torque that castle nut to atleast 80 ft lbs. Also do not back off the nut to put in cotter pin, keep tighting until the pin goes in.

09-23-2010, 08:32 AM	#5
COURTESYCART Gone Wild Join Date: Nov 2008 Location: Montgomery, AL Posts: 1,463	Re: 1997 ezgo electric golf cart I have seen the collar from the motor to input shaft of diff strip, but its very uncommon. I would have 2 agree with RIB. It sounds like you have a stripped hub/brake drum. If you replace them make sure you torque that castle nut to atleast 80 ft lbs. Also do not back off the nut to put in cotter pin, keep tighting until the pin goes in.