[UNKL_AL'S]

The solenoid on my DCS cart is not operating. the solenoid is good, but the blue wire (ground side, low current) is not making continuity to ground. my DVOM shows that it is, BUT its not. If I jump that terminal to ground the solenoid works.

all the micro switches, FWD, RVS, off throttle, are operating and show continuity when appropriate. so is the controller bad and just not making continuity to ground on the blue wire?

So the question is: what does the controller need to see to energize(????? or is the term "deliver ground"????) the solenoid?

thanks