Thread: OBC Bypassing
View Single Post
Old 01-21-2016, 06:17 PM   #2
TahoeDawgZ71
revolutiongolfcars.com
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
Default re: OBC Bypass ~ Technnical Tips

I'll add a little tip for those people who want to make this modification. I've often been asked what procedure is best used to make this modification. The OBC that is being bypassed has usually failed, creating the need to bypass it and use a standalone charger. Before you throw it in the trash, cut the 6 pin plug off of the old OBC, disassemble it and remove all of the unnecessary wires (Everything except the white and blue wires). Make a connection between the white and blue wires of the 6 pin plug. Butt connectors will work, but I prefer solder and heat shrink tubing. Plug the 6 pin connector back into the wire harness.
TahoeDawgZ71 is offline   Reply With Quote