View Single Post
Old 06-14-2022, 05:09 AM   #7
Gone Wild
mgray70's Avatar
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,306
Default Re: RXV Curtis Controller won't move

Originally Posted by cartdoc1969 View Post
If the cart jumps during the startup test, it has a bad brake. One of the startup tests is the controller will try to rotate the motor 1/4 turn in each direction. If the controller sees any movement during the brake test it will fail and not allow the cart to run. You can pull the brake and disassemble it. Clean the parts and see if that helps. Make sure not to over tighten the mounting bolts. Only tighten the three mounting bolts just enough to flatten the lock washers.
That's exactly what it's doing! Thanks!

Sent from my SM-G991U using Tapatalk
mgray70 is offline   Reply With Quote