View Single Post
Old 08-12-2022, 08:34 PM   #4
WalterM6
Gone Wild
 
WalterM6's Avatar
Club Car
 
Join Date: Apr 2017
Location: SE TN
Posts: 2,017
Default Re: 36V Lithium Charger Smokes. Somethings not right!

I see another thing that needs correcting. These two wires which are now connected to the battery- should be connected to the other side of the shunt resistor. Wires are labeled,2. charger negative cable and 3. combination cable of 12v reducer and negative to the fuse panel. Without them connected to the other side of the shunt the charge meter won't be able to measure charge or accessory current and the meter will be useless. I'll try and attach a picture with the correct connection point circled.
Attached Images
File Type: jpg Shunt connection.jpg (85.0 KB, 0 views)
WalterM6 is offline   Reply With Quote