View Single Post
Old 08-24-2022, 05:50 AM   #8
ojo
Gone Wild
 
ojo's Avatar
E-Z-GO
 
Join Date: Sep 2020
Location: Germany
Posts: 1,999
Default Re: Brake locked up but getting voltage

As i undestand, you got pack voltage at the grey/ black wires of the ebrake. According to the Troubleshooting Guide, only 12 - 18v should be obseved ( p. 33, # 5 ). Attache the ebrake for these test, as the controller can " see " the brake due to it's resistance. Check the pins of the connector, some other's reported here, a bad connection could be the issue.
ojo is offline   Reply With Quote