[kwest0425]

In running down a recent electrical problem with my 1981 g1, I noticed a couple of errors in the g1a and g1a5 diagrams at the site above.

Specifically, in the ignition switch matrix table on the diagram, the forward switch position should connect w/r-b. The matrix incorrectly indicates w/g-b.

Also, in reverse, the matrix indicates incorrectly a single connection between w/g-b-r-p. It should really indicate two different connections. One between w/g-b and a separate connection between r-p.

The 1982 g1a3 diagram is correct.

I have verified this against a 1983 g1 shop manual.

Hope this helps somebody.

-kwest