Buggies Gone Wild Golf Cart Forum - View Single Post

raydhd · 12-06-2014, 09:02 AM

I did not use the the RLV.I cut off about 6" of the vegascarts header.I put the muffler against the engine cradle and marked a spot giving me a couple of inches to put the pipe reducer and clamps.I think that full length trapezoid like outlet is what really gets rid of the loud lawn mower sound.I then used two large hose clamps to hold the muffler to the engine cradle.Last I bent the two round hangers up around the engine cradle.My hope is to later raise the body of the cart and move the muffler higher on on the engine cradle. It sits pretty low but so far I haven't knocked it off but you can certainly see where the paint has been scratched off from scraping on the ground.One more point I had to move the sway bar back with longer bolts and pipe spacers.

12-06-2014, 09:02 AM	#25
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,633	Re: clone exhaust I did not use the the RLV.I cut off about 6" of the vegascarts header.I put the muffler against the engine cradle and marked a spot giving me a couple of inches to put the pipe reducer and clamps.I think that full length trapezoid like outlet is what really gets rid of the loud lawn mower sound.I then used two large hose clamps to hold the muffler to the engine cradle.Last I bent the two round hangers up around the engine cradle.My hope is to later raise the body of the cart and move the muffler higher on on the engine cradle. It sits pretty low but so far I haven't knocked it off but you can certainly see where the paint has been scratched off from scraping on the ground.One more point I had to move the sway bar back with longer bolts and pipe spacers.