The next test i would do is this. Remove a spark plug,ground the case,and position so you can see the electrode.
Remove the +wire from the ignition coil. Jumpr a wire from The positive on battery to the + terminal of the coil. crank the motor, you should see a spark from your spark plug, if pulsar and ignitor are working properly. If you get a spark, then the problem lies between the ignition switch and the coil, probaly one of your micro switches. Let me know , if no spark,then we chceck pulsar,
here is a link to ebay ,where several hei are offered.
http://www.ebay.com/sch/i.html?_from...All-Categories