View Single Post
Old 07-13-2022, 06:53 PM   #2
Volt_Ampere
Gone Wild
Yamaha
 
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,189
Default Re: LiFePO4 Converted Stock Yamaha - "Cold Start" Tripping of BMS

You can measure the voltage on the two sides of the solenoid to see if there is a precharge resistor. It can be internal to the controller. The Alltrax I have on my YDRE has an internal precharge resistor so you don't need one on the solenoid.
Volt_Ampere is offline   Reply With Quote