[Grinch]

I'm not sure how the regens are bolted to the drive gears but probably the same as the series. If it isn't obvious call Ricky or Booby at PQ, they will talk you through it as it can be siezed on the spline and take a little work to wiggle off. While its off, pull the oil drain on the drive gear and drain the oil. There are three bolts for this. One is the drain, the other is higher up and serves as the full indicator (oil drips out when full, and the third is on the top for filling. Use a good quality synthetic oil too. This is what you'll be seeing: The axle without the motor (the plastic was to keep it dry when I was cleaning the frame), the new pq installed and a cart that has a 6" lift and 23" tires.