07-22-2013, 03:44 PM
|
#3
|
Gone Wild
Join Date: Jul 2011
Posts: 389
|
Re: G1 drive belt
Quote:
Originally Posted by slonomo
This is a G1, correct? Mine did the same thing. Those belts are just beefy and they need to get a little worn in. Mine would take off during starting, so the starter was making the clutch engage. Give it some time, it'll loosen up. Don Plowman even told me it would do that. I'd say a couple hours of drive time, and lots of starts and stops and it'll wear in pretty quick.
Don't get a longer belt, you'll lose quite a bit of low end torque.
|
thanks
|
|
|
|