Re: Yamaha G1/G2 36V Wiring Help
If the cart ran fine before the batteries were replace, I would look at all the connections to all the batteries first. Then check for continuity of each wire to make sure current is passing thru them. It only takes one broken cable to stop the flow of electrons. If all that is fine then start looking for a loose wire that may have fallen off during the installation of the batteries. It is always the simplest things that will drive you nuts to try to find. Beyond this I don't have a clue, I am electrical challenged. I know it takes a poss and a neg for ele to work and that is how I attach any ele issues. Good Luck.
|