View Single Post
Old 02-12-2013, 06:31 PM   #4
CharlieN
Gone Wild
 
CharlieN's Avatar
Yamaha
 
Join Date: Dec 2012
Location: E. Wallyworld Vermont
Posts: 234
Default Re: Charlie's Bravo powered G1 project

You will be running out of winter a month before I will so you best dig into that swap. As long as you have a suitable carb the project should not be bad.
I gave a fair bit of thought to the Enticer but since I needed to rebuild the crank in mine I was far better off gambling on a used engine.
CharlieN is offline   Reply With Quote