This morning I made a few clutch parts. I was missing the roller that rides over the spring so I bought a 6806 bearing and machined a tube that will support the belt from riding on the spring when idling.
First pic is the machined tube with bearing pressed in with a preload spacer next to it,
And here is the stack of roller, a preload spacer and the spring.
This is about all I want to do with this clutch at the time since the flyweights and pins are not in such great shape. I expect I will get this running and then decide if I will keep this clutch or move on to something newer or find a better set of weights for this one.