Buggies Gone Wild Golf Cart Forum - View Single Post

DIT Mobile · 04-13-2011, 10:39 PM

hmm 215 seems a little high but i guess its an old motor so the windings wont be as good.

is it exactly 0 ohms for the field? it should have at least some resistance, although it will be quite low, defo < 5 ohms.

that crack looks worrying as the other posts above state ^^
might be shorting the windings underneath.

also be careful when testing as if you have a short the windings could potentially explode :S

can you remove the rotor ( the rotary part of the motor ) ?
if so do you have a good electrical background and ill talk about growler test?

04-13-2011, 10:39 PM	#18
DIT Mobile Not Yet Wild Join Date: Feb 2011 Location: dublin ^.^ Posts: 35	Re: 93 club car won't go hmm 215 seems a little high but i guess its an old motor so the windings wont be as good. is it exactly 0 ohms for the field? it should have at least some resistance, although it will be quite low, defo < 5 ohms. that crack looks worrying as the other posts above state ^^ might be shorting the windings underneath. also be careful when testing as if you have a short the windings could potentially explode :S can you remove the rotor ( the rotary part of the motor ) ? if so do you have a good electrical background and ill talk about growler test?