Buggies Gone Wild Golf Cart Forum - View Single Post - 1985 36v forward reverse switch wiring and motor terminal identification

Jmpals · 08-07-2016, 01:19 PM

The Forward reverse switch on my 1985 Club car broke, shorted and actually caught fire. I ordered a new switch from here and downloaded the schematic (thank you). Had to replace several wires and now it does not work.
First question, every diagram I see shows the motor terminals in a straight line, mine are more side by side, motor model 1012190 (maybe this was not original motor?), the markings on the motor are gone, how do I identify which terminal each wire go to, on the motor
2nd question, how do I do the same one the F/R switch?
3rd question, am I supposed to jumper the bottom of the F/R switch? I have seen that in several posts on the internet
Thanks

08-07-2016, 01:19 PM	#1
Jmpals Not Yet Wild Join Date: Aug 2016 Location: Iowa Posts: 3	1985 36v forward reverse switch wiring and motor terminal identification The Forward reverse switch on my 1985 Club car broke, shorted and actually caught fire. I ordered a new switch from here and downloaded the schematic (thank you). Had to replace several wires and now it does not work. First question, every diagram I see shows the motor terminals in a straight line, mine are more side by side, motor model 1012190 (maybe this was not original motor?), the markings on the motor are gone, how do I identify which terminal each wire go to, on the motor 2nd question, how do I do the same one the F/R switch? 3rd question, am I supposed to jumper the bottom of the F/R switch? I have seen that in several posts on the internet Thanks