View Single Post
Old 04-28-2022, 05:06 PM   #4
slonomo
Searching for The Way
 
slonomo's Avatar
Yamaha
 
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,421
Default Re: What clone are you running?

Quote:
Originally Posted by bronsonj View Post
I ran a HF 212 with a Torq-A-Verter in a metal bodied metalist and it was actually quite a fun ride! Not a 440 by any means but still fun. It'd get up to 23mph before valve float kept it from going faster. I ran that for a year or so, then sold it to some guy whose daughters used it like an ATV on their property and beat the snot out of it. last I saw the Kill switch came off of it and they loaded it on the trailer running, secured it and drove off with it still running on the trailer! Didn't even turn off the fuel!

My next clone is a Husqvarna 208cc in a mobility scooter... It should arrive in a couple days. Other than that I've been bouncing around the sparky forums.
Cool! I've used a 212 before. It was in my son's little go kart, very fast in that machine. I've seen a few use them in golf carts with good success, probably very similar to a stock powerplant, at a fraction of the cost.

I've never seen a Husky clone, post some pics!
slonomo is offline   Reply With Quote