Buggies Gone Wild Golf Cart Forum - View Single Post

kyerik · 11-03-2012, 08:48 PM

As for the question about needing a press, I removed my crank bearings by using a chisel as a wedge and with a bearing puller. The new bearings went on to the crank pretty easy with a hammer, flat punch and some light to moderate tapping. You can split the crankcase halves with a modified steering wheel puller.

11-03-2012, 08:48 PM	#2
kyerik Gone Wild Join Date: Aug 2012 Location: South central IL Posts: 287	Re: 88 ezgo Top & Bottom End Engine Rebuild As for the question about needing a press, I removed my crank bearings by using a chisel as a wedge and with a bearing puller. The new bearings went on to the crank pretty easy with a hammer, flat punch and some light to moderate tapping. You can split the crankcase halves with a modified steering wheel puller.