View Single Post
Old 01-17-2015, 07:58 PM   #26
cableguy_hd
Gone Wild
 
cableguy_hd's Avatar
E-Z-GO
 
Join Date: Nov 2011
Location: Danville,Va.
Posts: 654
Default Re: My cart wont move. Please help with troubleshooting

ok guys, Thanks for the help but if all possible I'd like to start over on the trouble shooting. I went and reread this and did some tests. Here is what I found.
1. back nut on F/R is as tight as it will go
2. The wrench made no difference on the F/R
3. Have pack voltage at M- & B- and voltage does not go down when pedal is pushed
4. No green led on controller
5. Checked pin 1 on connector while on controller ( I have 1 pc connector not 4 pins )
I checked by putting dmv on pack neg and pos on the back of said connector and when pushing pedal it was 13.2v and stayed the same when pedal went to floor.
cableguy_hd is offline   Reply With Quote