View Single Post
Old 08-18-2009, 10:50 PM   #4
bioniccartsandcustoms
Runnin' with Scissors
 
bioniccartsandcustoms's Avatar
Club Car
 
Join Date: Aug 2009
Location: In My Shop
Posts: 415
Default Re: Will not go into Reverse

There are two brass synchronizer rings in the rearend of the gas cart CC part # 101981001. One for forward and one for reverse. Under extreme load or if oil gets low, these will seize to the Input Gear assembly #101980801. This can cause the problems you described. Also there are a few thrust plates that can almost disintigrate to nothing and cause the cart to jump out of forward or reverse as soon as you try to accelerate.
If it is just the brass rings, you can pull the rear apart and sometimes clean up the pieces with emery cloth and they will work fine. Also had to tear into rearend again when quick fix didn't work. If its the synchro. rings, just replace them.
bioniccartsandcustoms is offline   Reply With Quote