Quote:
Originally Posted by R&TBabich
The Charger Disable interlock is on controller pin #5 - Light Blue.
Supply +48v on that line for the cart to go.
The OBC would pull that input when charging.
You could just connect it to +48v all the time, just remember to disconnect the charger when you want to use the cart.
The White input line to the OBC is +48v from the Tow/Run switch.
When bypassing/removing the OBC the White line gets connected to the Light Blue.
Or run a new wire to the Light Blue from the Light Green of the Tow/Run switch.
|
This is the oddest thing. I had done the bypass with the white and blue wires and I still get the true reading on the charger input. I can disconnect the white and blue wires and the cart will run in limp mode.