Quote:
Originally Posted by cgtech
As long as the rpm sensor is connected, it always will resist rolling away of pushed. This combo leads me right to controller.
- tow/run provides B+ to small red on solenoid, so we know tow/run works (controller provides B-)
- no reverse buzzer, or beep when pushing, and it is hooked up. (Controller powers reverse buzzer)
- controller doesn't resist being pushed
- solenoid operation has been tested
All points to bad controller.
It is my policy to remove & inspect motor when failed controller (because bad motors can kill controllers). It would be best for you to get a alltrax controller, not another stock one, you will get improved power and much higher top speed. With stock motor, I wouldn't go any bigger than "XCT-48400-G19"
|
CG,
Thank you so much. I will double check the roll away and the motor. BTW, I have an extra working g29 motor, will that work on the g19?