View Single Post
Old 10-16-2020, 01:01 PM   #25
JPonLKN
Gone Wild
 
JPonLKN's Avatar
E-Z-GO
 
Join Date: Jul 2020
Location: NC
Posts: 773
Default Re: EZGO Workhorse / Jacobsen Build

Quote:
Originally Posted by kgsc View Post
ST350 is normally a short body so would use the same cable as a txt. Never heard of one especially for them. The 1200 mpt frame is 11” longer than a txt.
Do a quick Google search on EZGO ST350 Brake Cable, and the cables are listed in the specs as 47-1/2" on the driver side and 57 1/2" on the passenger side for 1996-up ST 350. I'm still trying to locate a single 57 1/2" cable, as all I am finding is the sets, but I want to make sure the throw between the brake arm and the bracket behind the backing plate is the same as a TXT, and that the mounting point for the cable and the compensator clip is about the same. I can adjust the compensator arm as it is a threaded rod.

The parking brake needs to be off when the pic is taken, but the space between the mounting bracket and the fully extended arm at the brake backing plate needs to be about the same between the two models, I think. I expect they are...just want to verify.
JPonLKN is offline   Reply With Quote