Buggies Gone Wild Golf Cart Forum - View Single Post

tom.robson · 01-18-2018, 10:10 PM

Thanks cgtech. Was figuring that. I have a metal lathe in the garage so I will try and machine the weld off and see if I can get it separated. Should be easy to get back together with a spot weld and on each side to lock it in place.

01-18-2018, 10:10 PM	#3
tom.robson Not Yet Wild Join Date: Jan 2018 Location: Atlanta GA Posts: 8	re: 1989 G1 Rear axle bearing replacement Thanks cgtech. Was figuring that. I have a metal lathe in the garage so I will try and machine the weld off and see if I can get it separated. Should be easy to get back together with a spot weld and on each side to lock it in place.