Buggies Gone Wild Golf Cart Forum - View Single Post

shorty102292 · 02-27-2016, 03:27 PM

I will add a much easier way to get ANY sliding clutch off and have done it for years with sleds. Water simple h2o and a bolt with teflon tape. remove the clutch bolt and get a cup of water pour it in the hole till full tip a smite out get the bolt cover end in teflon tape and send it in with an impact or breaker bar. Simple hydrolics can't compress a liquid it will come off and no steel in there so no worries about mucking up the shaft.

02-27-2016, 03:27 PM	#3
shorty102292 Not Yet Wild Join Date: Feb 2016 Location: rogers city mi Posts: 33	Re: Engine/clutch removal 295, 350 I will add a much easier way to get ANY sliding clutch off and have done it for years with sleds. Water simple h2o and a bolt with teflon tape. remove the clutch bolt and get a cup of water pour it in the hole till full tip a smite out get the bolt cover end in teflon tape and send it in with an impact or breaker bar. Simple hydrolics can't compress a liquid it will come off and no steel in there so no worries about mucking up the shaft.