View Single Post
Old 04-08-2009, 11:28 AM   #2
larryh
Not Yet Wild
Club Car
 
Join Date: Jan 2009
Location: Mississippi
Posts: 40
Default Re: tuning potentiometer???

Your controller probably has the hold off option. I've got the GE 500/600 controller and it did the same thing. Read the literature that came with the controller and you will see where it talks about pot adjustments. That does not mean your PB-6, it means adjusting the potentiometers within the controller. Mine has three and I can't remember what they are, but one is acceleration. It was factory set at something like 1.5 seconds. You can adjust with a small screwdriver by turning clockwise. The "lag" is gone now when you push the gas, but with the D395 motor whiplash is a concern. I'm simply speculating about the fix, because I don't know if your controller has the adjustments. You can easily tell by looking at the side of it. There will be three small plugs that will pull out. If your unsure, call the guys at carts zone, they can set you on the right path.
larryh is offline   Reply With Quote