Buggies Gone Wild Golf Cart Forum - View Single Post

rabbitreborn · 07-23-2011, 10:29 PM

ok everything looks wired correctly which leaves me with just a few questions....

have you checked the output of the pot box? Is it a smooth increase from 0-5k?

when you removed/replaced the wires going to the motor did you use 2 wrenches? I have seen studs spin and cause a similar issue.

Are you going to replace that solenoid? It is actually the wrong solenoid for the cart and COULD be the cause of your problem since it peaks at 200 AMPS and that controller looks like the 300 AMP controller that E-Z-GO used for a few years.

07-23-2011, 10:29 PM	#5
rabbitreborn Gone Wild Join Date: Jun 2010 Location: Central Florida Posts: 2,757	Re: 94 Marathon jerky at slow speed. ok everything looks wired correctly which leaves me with just a few questions.... have you checked the output of the pot box? Is it a smooth increase from 0-5k? when you removed/replaced the wires going to the motor did you use 2 wrenches? I have seen studs spin and cause a similar issue. Are you going to replace that solenoid? It is actually the wrong solenoid for the cart and COULD be the cause of your problem since it peaks at 200 AMPS and that controller looks like the 300 AMP controller that E-Z-GO used for a few years.