Buggies Gone Wild Golf Cart Forum - View Single Post - It won't move at all and I cant figure it out

Fulmenjacio · 10-28-2021, 01:30 PM

Alright, thank you for everyone's help. I checked the wiring on the new controller which is an updated Curtis and found i had two if the low voltage wires swapped (KSI and low voltage +). So, now it runs great IN FORWARD ONLY....I cleaned the FNR contacts but that didn't take care of it. I revisited the Curtis manual which says I MUST have a wire from the A2 lug on the controller to A2 on the motor...so, wire attached, and still nothing in reverse. In forward I'm getting 18-19MPH...when in reverse, buzzer sounds, solenoid clicks, but no movement.

10-28-2021, 01:30 PM	#8
Fulmenjacio Not Yet Wild Join Date: Oct 2021 Posts: 8	Re: It won't move at all and I cant figure it out Alright, thank you for everyone's help. I checked the wiring on the new controller which is an updated Curtis and found i had two if the low voltage wires swapped (KSI and low voltage +). So, now it runs great IN FORWARD ONLY....I cleaned the FNR contacts but that didn't take care of it. I revisited the Curtis manual which says I MUST have a wire from the A2 lug on the controller to A2 on the motor...so, wire attached, and still nothing in reverse. In forward I'm getting 18-19MPH...when in reverse, buzzer sounds, solenoid clicks, but no movement.
Fulmenjacio Not Yet Wild Join Date: Oct 2021 Posts: 8