Buggies Gone Wild Golf Cart Forum - View Single Post - "Early 90's EZGO

madoc1 · 05-17-2011, 10:29 AM

first, you don't want to run both the oil pump and premix. just un plug the pump and fit a small bolt in the manifold to block where the oil went in. too much oil will foul the plug and plug up the muffler. to deglaze you will need a cylinder hone. be gentle tho, too much and you will remove precious thous. off the wall. slip the piston down the cyl. and measure the side away from the piston thrust, i.e. the side of the piston that has no holes. you should have no more than the .007 clearance.

05-17-2011, 10:29 AM	#27
madoc1 no clue Join Date: Sep 2009 Location: spicewood, texas Posts: 3,308	Re: "Early 90's EZGO - Needs a Rebuild" first, you don't want to run both the oil pump and premix. just un plug the pump and fit a small bolt in the manifold to block where the oil went in. too much oil will foul the plug and plug up the muffler. to deglaze you will need a cylinder hone. be gentle tho, too much and you will remove precious thous. off the wall. slip the piston down the cyl. and measure the side away from the piston thrust, i.e. the side of the piston that has no holes. you should have no more than the .007 clearance.