Buggies Gone Wild Golf Cart Forum - View Single Post - Inside An MCOR 01-04 DS

Marshred · 12-31-2013, 09:19 AM

Well, the POT looked great! A little dielectric grease on the carbon surface will fix it up. The main thing to watch for when putting this back together will be the fact that the saw Kerf is about 1/16 inch. This will tighten up the end play of the pot shaft when I put the lid back on. I can use some shim material if needed and RTV SEALANT between the lid and box. There you have it!
{{{warning}}} I would not remove the pot shaft. It has a pretty heavy return spring that would not be fun to put back into place.

12-31-2013, 09:19 AM	#10
Marshred Not Yet Wild Join Date: Apr 2013 Location: Southwest Louisiana Posts: 31	Re: Inside An MCOR 01-04 DS Well, the POT looked great! A little dielectric grease on the carbon surface will fix it up. The main thing to watch for when putting this back together will be the fact that the saw Kerf is about 1/16 inch. This will tighten up the end play of the pot shaft when I put the lid back on. I can use some shim material if needed and RTV SEALANT between the lid and box. There you have it! {{{warning}}} I would not remove the pot shaft. It has a pretty heavy return spring that would not be fun to put back into place.