View Single Post
Old 05-17-2015, 09:19 AM   #3
monte5211
Not Yet Wild
 
Join Date: May 2015
Posts: 11
Default Re: DCS controller testing and ITS throttle test

Thanks for your help. My voltage at b- to b+ was 36.8 with everything off, and is 34.4 full pedal. at b- to A1 it is 36.8 and then goes to 27.7 full pedal. My batteries are new and read 36.9 volts. When I plug in my charger it doesn't kick on. So I think they are full enough to not be calling for a charge? The test at the 10 pin black wire is 14.0 volts. The test on the white wire was .5 and climbs smoothly to 1.7v. The solenoid does click and is new. My old one was clicking also but I replaced it to rule that out. I didn't realize the nut on the FNR switch was for tension, so I started to take it off, when it released the spring I put it right back on. But now my forward doesn't seem to kick the solenoid. Reverse still kicks the solenoid so I think I need to adjust the FNR switch now.
monte5211 is offline   Reply With Quote