Quote:
Originally Posted by Tech Support
VIN?
|
Hi my friend, all of a sudden I've got no reverse. Found several recommendations to check the key switch and clean it up or replace if terminal posts look burnt. Actually I think it may have an internal problem as when I turn the key to the forward position the cart will move slightly ahead. Your thoughts would be appreciated. My real question is actually on the schematic. I noticed that on the battery series connection that one of the batteries is not connected in series in the bank. One wire + is going to the contactor and from the next battery - is going to the B- terminal on the controller.
I took up electrical when I was in H. S. but that was 50 years ago so I am a little rusty if you know what I mean. Feels good to get back into it somewhat with this piece of junk golf cart that I bought 6 months ago.
Ok back to the question: how come there is no bridge between those 2 batteries to complete the 48V series connection?
Sent from my iPhone using Tapatalk