Buggies Gone Wild Golf Cart Forum - View Single Post

scottyb · 12-04-2021, 11:24 AM

It sounds like maybe the bearing is not fully installed (not seated in the correct location)
I use a 6" piece of 3/4 steel pipe to seat the bearing. place the axle in a vice with the bearing end up. Slide the bearing on followed by the pipe. Tap the pipe with a hammer until the bearing is seated in the proper location.

12-04-2021, 11:24 AM	#40
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: axle bearing and seal replacement. It sounds like maybe the bearing is not fully installed (not seated in the correct location) I use a 6" piece of 3/4 steel pipe to seat the bearing. place the axle in a vice with the bearing end up. Slide the bearing on followed by the pipe. Tap the pipe with a hammer until the bearing is seated in the proper location.