View Single Post
Old 02-02-2023, 02:22 PM   #2
Volt_Ampere
Gone Wild
Yamaha
 
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,193
Default Re: New Controller- No Power

Yes you should get voltage at the key switch. (relative to the battery ground) Run your laptop and see what signals the controller is seeing. It's all there when you are connected. Sounds like the control circuit is open. Maybe a blown fuse or something misconnected. Get the schematic out and trace that control circuit that goes to the switch. I don't know the wiring for that cart but on my Yamaha carts, that comes directly from the battery positive through a fuse.
Volt_Ampere is offline   Reply With Quote