[hsdtech]

Just did some checking, and I noticed the microswitch next to the reverse buzzer only has one wire. It's a red wire jumped to the buzzer. It looks like there should be another tang on the switch, but may be broken off. I say this because hanging below there is another red wire that is not connected to anything, but has 12v on it when the key is on.
Should this wire also be connected to the microswitch? Running with the 2nd red wire is a green wire.
I'm thinking a tang on the switch broke off where the second red wire with 12v should be. I have the service manual but its unclear if the switch should have 2 red wires.