Quote:
Originally Posted by Ronno6
Is it just a simple matter of unplugging the harness and rerouting the other wires as per the video??
(Black #10 to from charger plug battery negative; cut gray wire , splice to yellow at solenoid and connect to battery negative..)
Actually, I would think that the #10 black should go to new lithium charger??
Thanks
|
You won't need that wire, nor the charger receptacle for your new charger. That just plugs into a 120 volt outlet.
The black wire from the charger receptacle was normally cut at the obc and run to pack negative in situations where a smart charger was connected to the old charger receptacle.