[Cartmaster]

.8 what?

You need to check for continuity as previously stated. power comes from a fuse under the plastic cover by the battery then up to the F/R switches, so if you have reverse beep then the fuse is good. the next place power goes to is the pedal switch, then follows through to the ignition switch which then feeds the rest of the start system. the usual culprit is the pedal switch, so if you do not know how to test continuity just pull the wires off the switch and connect the two wires together, then turn the ignition on, the starter should then spin. If so, change the switch. this way you don't need your meter.

And for your information, the lights are usually on a separately switched circuit in the ignition switch with a separate feed and not relevant to your issue.