Leveling The Rear End???
I have a new ST Sport 2+2 with the Kawasaki 401cc motor. It has the newer factory lift with steering setup in the front which I believe is rack and pinion. It's different than the 2008 model was as it sits about an inch or 2 higher. Anyhow the front sits slightly higher (about 1/2 in) than the rear. What can I do to level it? Are there blocks that are 1/2" that will work with this setup? The stock U bolts seem long enough to add a 1/2 inch block if they make one. Any other suggestions would be appreciated.
|