Buggies Gone Wild Golf Cart Forum - View Single Post

scottyb · 06-07-2010, 10:16 AM

The fill hole is on the pan. It holds about 1/3 of a quart + or - . This could be a tough fix at the campground unless you are good. You will need a snap ring pliers, seal puller, a way to press the bearing off and on the axle. It can be done you just will need to be set up properly.

06-07-2010, 10:16 AM	#4
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,408	Re: axle bearing and seal replacement. The fill hole is on the pan. It holds about 1/3 of a quart + or - . This could be a tough fix at the campground unless you are good. You will need a snap ring pliers, seal puller, a way to press the bearing off and on the axle. It can be done you just will need to be set up properly.