Won't crank, I'm stumped
Won't crank. I suspected throttle pedel switch, but it ohms out good. Connectors were gross, so I replaced them. I've got power through the switch. I can jumper the solenoid and it will crank. I ohmed the red/white wire to the solenoid from the switch and it looks ok. But I do not have power at the solenoid when pedel is pushed. I know my ground is good as I can jump it to crank. I ran a jumper wire from the switch to the solenoid and got nothing. Just writing this out gave me a couple ideas I need to try. One other question: If you are turning the starter with the pedel pushed down, is it running when the engine is running? How does it turn from a starter to a generator if you're power the start side of the field coil?
|