[DanielMv720]

Originally Posted by ArkansasVolt

I bought the Zeva BMS16.

http://www.zeva.com.au/index.php?product=135


Specifications

[http://www]*Cells managed: 8 to 16 cells*
[http://www]*Supported chemistries: LiFePO4, LiCo, LiPo, LiMn*
[http://www]*Maximum total voltage: 60V*
[http://www]*High, low and shunt voltage thresholds: Factory configurable between 2.00-4.50V*
[http://www]*Accuracy: 0.001V*
[http://www]*Dual solid state relay (SSR) outputs, 60V 1.3A max*
[http://www]*Built-in current measurement via shunt*
[http://www]*CAN bus interface for external monitor, hall effect current sensors, TC chargers, etc.*
[http://www]*Status LED for visual feedback*
[http://www]*Internal switchmode power supply*
[http://www]*Internal shunt balancers (~120mA)*
[http://www]*Dimensions: 106x80x16mm*
[http://www]*Mounting holes: 2x Ø4mm, 116mm apart



Sent from my XT1650 using Tapatalk

I still couldn't figure out the max amperage. I was browsing the website and just couldn't figure it out. How the do bms amperage ratings work? for example the Chevy volt pack I have is 48v & 47amp but when it comes to finding a bms what amperage am I looking for?