I cleaned the controller up, and all other connections i could find. Still doesnt move.
I measured the throttle potentiometer, it has 3 cables coming out of it.
Black, blue, and green.
black and blue is going in to curtis controller, green is going to micro switch in F&R switch and also routes to the back somewhere on the cart.
My measurements with keyswitch off:
*Black and blue=No throttle 0kOhm, Full throttle 5.03KOhm. No hops or "dead zones".
*Black and green=No throttle 52.5k Ohm, Full Throttle 52.5kOhm
*Blue and Green=No throtte 52.5k Ohm, Full throttle 59.1K Ohm.
Anything out of the ordinary?