Buggies Gone Wild Golf Cart Forum - View Single Post - 1988 EZGo solenoid replacement part number? (resistor speed control, not solid state)

scottyb · 08-02-2016, 08:36 PM

Any 200a constant duty GC solenoid will work. There is a wide range of quality out there from junk to overkill. But you will be better served by overkill. WR is a good brand and so is Albright.

Also FYI more than just a welded solenoid has to go bad for the cart to creep while off. The throttle sweep has to not go to zero position..... still asking for impulsion. That is the second half of the problem here. I hope this helps

PS let us know if you are fed-up with resistor coil drive. There are still a few kits left

08-02-2016, 08:36 PM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,406	Re: 1988 EZGo solenoid replacement part number? (resistor speed control, not solid st Any 200a constant duty GC solenoid will work. There is a wide range of quality out there from junk to overkill. But you will be better served by overkill. WR is a good brand and so is Albright. Also FYI more than just a welded solenoid has to go bad for the cart to creep while off. The throttle sweep has to not go to zero position..... still asking for impulsion. That is the second half of the problem here. I hope this helps PS let us know if you are fed-up with resistor coil drive. There are still a few kits left