Thread: G1 Clutch
View Single Post
Old 04-07-2011, 11:39 AM   #10
sho305
Vegas modded 420
 
sho305's Avatar
Yamaha
 
Join Date: Jun 2009
Location: West MI
Posts: 15,445
Default Re: G1 Clutch

See if TNT has any of those parts, they do have some old stuff. It might be out there used if you want to hunt. Cartpartsplus has the tech iirc, go to big block section and look at the sticky for clutches they list who has them....but you likely want the stock replacement clutch for a taper shaft with the gen pulley, not the 1" keyed most big blocks use. Comet makes the 94 too but parts hard to find they went out of biz, however supposedly the new owners are going to produce more not sure whats up with that. If you want to change weights or springs you need them to be available is what I am saying.

You can also use any newer yamaha clutch, however the big cover will hit the frame if you put a lift for 22s on your cart and you have to mod the frame to clear. Keep that in mind for whatever clutch you get, but may not be able to avoid that. Note you can't mod/adjust the yamaha clutches like the aftermarket, in case you want it to pull the front tires when you take off....lol...yes its possible but you will hate driving it that way.
sho305 is offline   Reply With Quote