View Single Post
Old 11-14-2010, 05:23 PM   #7
rib33024
......................
 
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
Default Re: motor coupling ?

Here's a test to see if the hub is striped,----try this before you take it apart

-- you need to be able to see the nut that is holding the brake drum on the axle, if it has a cover over it remove the wheel or cap what ever it takes to see the nut, put it on jack stands if you have to,MAKE SURE the cart can NOT MOVE / run over something, and have some one sit in the cart and put there foot on the brake TIGHT so the cart wont move,
then have some one look at the nut that is holding the hub on, push on the go pedal EASY and see if the nut is spinning and not the hub, check both sides, if the nut is spinning the hub is striped out and you need a new one .




let us know what you find




BGW...or... anyone on this forum, ... BGW itself, is/are NOT responsible for your actions in the result of using, or, misusing this information that may cause possible damage to yourself, your property, or someone else!
rib33024 is offline   Reply With Quote