View Single Post
Old 08-18-2008, 12:56 PM   #8
wizard
Not Yet Wild
 
Join Date: Aug 2008
Posts: 5
Default Re: starting problem with 1989 EZGO 2-cycle

I did clean out the main jet, but I'll try blowing out the fuel lines as well. Thanks, everyone, for all the tips.....by the way...I am concerned that so little oil is being used from my oil tank. I think I had better block off the oil pump and mix my gas. Ratio of 1 oz oil to 1 gallon gas.....besides the injection port in the intake manifol;d what else should I block off?
wizard is offline   Reply With Quote