Re: need help! dcs clicks but wont move
If the Run/Tow switch is in RUN when any wire were disconnected or reconnected, the controller could be blown.
Also, if the pack sit for several days and wasn't recharged charged prior to trying to move the cart, the low voltage might have taken out the DCS controller. (Stock DCS controllers have no low voltage protection)
If the solenoid clicks when the pedal is pushed, the problem is in the high current circuit.
What is the pack voltage?
Connect a DVM between the controller's B- and M- terminals.
You should read full battery pack voltage when pedal is pushed just far enough for solenoid to click.
What voltage do you get?
|