Quote:
Originally Posted by mazdawg(Mikey)
ok i tested every red line in the picture. i got 36.8 at the pack, and with the key on i got between 36.3-36.5 everywhere. i did have to press the pedal to get 36.3 at the green wire. does this make sense and what can i check next?
|
Print the diagram out and take it with you.... 38v positive to green wire is good. Lift the 9 wire plug up just enough to slip your test leads under it and check for + power at pins 5,6,9,10. If yes but no solenoid click - check for 38 v - at pin 7, if yes put test leads on 2 small terminals at solenoid and see if 38v present and solenoid clicks. This completes the test of the solenoid activation circuit.