Re: LiFePO4 Battery Charger
That is not what that means...
There is no difference in "Algorithms", they both use a CC/CV algorithm.
The difference is the final voltage and that answer is because 58v is too high for a LiFePO4 pack.
Since there is not an external knob to adjust the voltage, the only reasonable answer from a Seller is "they are not adjustable" since they don't want people opening the box and screwing things up.
There are other answers on that same question from folks that changed the voltage without issues.
The "UZ-" chargers are not adjustable since a few members here tried.
The YL-600 and the UY-600 should adjust.
Just make sure the charger is not connected to the pack when you adjust.
Post a picture of the inside of the charger so we can see the trim-pot arrangements of your charger.
Mark or take a close up picture of the existing trim-pot positions and count the turns in case You adjusted the wrong one and need to put it back.
|